Seat Air Bag Modules: Installation
WARNING: This page is about a different car, the 2002 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Install seat air bag into seat frame and tighten retaining nuts to specification. See TORQUE SPECIFICATIONS .
- Install plastic coated resistance spring as mirror image of spring on opposite side of seat.
- To complete installation, reverse removal procedure. Tighten front seat bolts. See TORQUE SPECIFICATIONS . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK .