Air Bag Control Module: Installation
WARNING: This page is about a different car, the 2002 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
New air bag control module must be reprogrammed using programming function of Tech 2 scan tool. See AIR BAG CONTROL MODULE PROGRAMMING under DIAGNOSTICS.
To install, reverse removal procedure. Ensure arrow on control module points toward front of vehicle. Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK .