The MIU uses the following information:
INFORMATION VALUE
| Information | Values | From | The value depends on the following sensor input, signal or function |
|---|---|---|---|
| LH direction indicators | ON/OFF | DICE | The MIU lights the indicator lamp for LH direction indicators. |
| RH direction indicators | ON/OFF | DICE | The MIU lights the indicator lamp for RH direction indicators. |
| Rear fog light | ON/OFF | DICE | The MIU lights the indicator lamp for the rear fog light. |
| A/C | ON/OFF | DICE | Request from DICE for activation of A/C. The MIU passes on the request by grounding the output to the engine management system. |
| Current consumption | ON/OFF | DICE | The Current consumption ON message is sent out on the bus 0.1 seconds before DICE activates the radiator fans. The MIU grounds a lead from Motronic which then compensates for the increased load in its idle speed control circuit. |
| Driver's door | OPEN/CLOSED | TWICE | The MIU lights the driver's door symbol. |
| Passenger's door | OPEN/CLOSED | TWICE | The MIU lights the passenger's door symbol. |
| LH rear door | OPEN/CLOSED | TWICE | The MIU lights the LH rear door symbol |
| RH rear door | OPEN/CLOSED | TWICE | The MIU lights the RH rear door symbol. |
| Boot lid | OPEN/CLOSED | TWICE | The MIU lights the boot lid symbol. |
| Steering wheel location | LHD/RHD | TWICE | Control module programming. The MIU uses the information to indicate open door in the pictogram, driver door/passenger door. |
| Immobilization | ON/OFF | TWICE | Immobilization function |
| Info Disp Lamp | ON/OFF | SID | The MIU lights the Info Display indicator lamp in the event of a text message. |
| Rheostat level | 0-100 % | SID | The MIU uses information on the rheostat setting to control the brightness of the instrument lighting. |
| Night Panel | ON/OFF | SID | The MIU turns off the lighting of certain instruments and displays. |
| Display lighting | 0-100 % | SID | The MIU uses the information to control the display lighting. |
| Light intensity in cabin | Lux | SID | The MIU uses the information to control the brightness of indicator lamps. |