Setting the year, month and day in SID 2.

Fig 1: Setting Year, Month And Day In SID 2

Courtesy of SAAB-SCANIA OF AMERICA, INC.

1. Select function "TEMP".
2. Hold down the SET button for longer than 1 second, "year" begins to flash.
3. Select the year in steps down/up using the Dot ( -) or Arrow (+) buttons (scroll down/up).
4. Press "SET", the year is stored in the SID unit.
5. "Month" begins to flash. Select in the same way as step  3.
6. Press "SET" to store the "month ".
7. "Date" begins to flash. Select in the same way as step  3.
8. Press "SET" to store the "date".

Year, month and date are stored if the SET or CLR button is pressed, and if the ignition is turned off.