Odometer/trip meter: Notes

The main instrument unit's control module stores the distance driven and shows it on the odometer display. The display contains a six-digit counter which the control module continuously updates from 000000 to 999999 km (or miles). The trip meter has a four - digit counter which starts at 000.0 and runs to 999.9 km (or miles). With the ignition ON, the trip meter is zeroed with the reset button. The display will be activated for 20 seconds if the reset button is pressed with the ignition OFF. An odometer reading is then obtained.

Information on the distance driven is sent out on the bus by the main instrument unit. This information is used by the SID and other units.