LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2000 >> 9-3 Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Main Instrument Panel, Petrol - 9-3 >> Adjustment - Replacement >> Engine coolant temperature sensor >> To fit

To fit

Fig 1: Installing Temperature Sensor's Connector
G03463577Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Fit the temperature sensor, grease the threads with Molycote 1000 or the equivalent.

    Tightening torque: 6 N.m (4.5 lbf ft) 

  2. Plug in the connector.
  3. Top up the coolant and check the system for leaks.
scientia non olet · About LEMON Manuals