LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2000 >> 9-3 Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges And Lights >> Component Tests >> Indicator & Warning Lights >> SPORT Indicator Light

SPORT Indicator Light

  1. Disconnect Main Instrument Unit (MIU) 20-pin connector at rear of instrument cluster. See Figure . Connect test light between 20-pin connector terminal No. 19 (Green/White wire) and battery positive voltage. Turn ignition on. Use Tech 1 scan tool to contact Transmission Control Module (TCM). Activate SPORT light. If test light comes on, replace bulb. After repair, go to next step. If test light does not come on, repair open circuit in Green/White wire between MIU connector terminal No. 10 and TCM connector terminal No. 24. After repair, go to step  3 .
  2. Clear DTCs. Use scan tool to perform a functional check of SPORT light. If light comes on, system is okay. If light does not come on, replace Main Instrument Unit (MIU) module.
  3. Clear DTCs. Use scan tool to check TCM operation. If TCM operation is okay, system is okay. If TCM operation is not okay, replace TCM.
scientia non olet · About LEMON Manuals