ABS warning lamp: Notes
The ABS control module monitors the function of the ABS system and in the event of a fault lights the ABS warning lamp, which is situated on the right-hand side of the main instrument unit.
When the ABS lamp lights up, the anti-lock braking system is disabled and the brakes work just like a conventional braking system.
The lamp is supplied with current in the main instrument unit and grounded via main instrument unit terminal 10 (K20) in the ABS control module.
The ABS control module lights the lamp when the ignition is switched on and if there is no fault it will go out after approx. 3 seconds.
When the ABS warning lamp lights up, the brake fluid warning lamp and central warning lamp will also light up.