LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Main Instrument Panel, Petrol - 9-3 >> Adjustment - Replacement >> Main instrument unit >> To remove

To remove

Fig 1: Identifying Main Instrument Unit
G03463560Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove upper and lower steering column cowls, 3 screws.
    NOTE: Exercise care when removing the steering column cowls. The 4 snaps holding them in place may easily break.
  2. Remove the direction indicator and windscreen wiper stalk switches.
  3. Remove the radio.
    NOTE: Make a note of the radio code (if the radio is not a Saab unit).
  4. Remove the SID unit.
  5. Remove all switches, shiny buttons and the seat -belt warning lamp.
    Fig 2: Removing SID Unit
    G03463561Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the instrument plate, 9 screws.
  7. Detach the instrument plate and move it outwards into the cabin area.
  8. Remove the four screws securing the main instrument unit.
    Fig 3: Removing Four Screws Securing Main Instrument Unit
    G03463562Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Unplug the connectors at the rear of the main instrument unit.
  10. Lift out the main instrument unit.
scientia non olet · About LEMON Manuals