LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1992 >> 900 Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Removal & Installation >> Rear Crankshaft Oil Seal >> Installation (All Models)

Installation (All Models)

Lubricate sealing surface of new seal with engine oil. Install into position with Seal Installer (83 92 540). Reverse removal procedure to complete installation. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals