LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1992 >> 900 Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

Grease sealing surface of new seal. Press seal into position with Seal Installer (83 93 349). Reverse removal procedure to complete installation. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals