LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1992 >> 900 Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Rotate crankshaft until "0" mark on flywheel aligns with timing mark on flywheel cover. Remove inspection panel from valve cover. On 900 Series, disconnect ignition leads and vacuum hose from distributor. Remove distributor (if equipped). On 9000 Series, remove ignition cartridge.
  2. Remove valve cover. Remove camshaft sprocket retaining bolts. Remove chain tensioner, camshaft sprockets, and timing chain. Remove oil line and camshaft bearing caps. Remove camshafts.
scientia non olet · About LEMON Manuals