LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1992 >> 900 Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Overhaul >> Cylinder Head >> Valve Springs

Valve Springs

  1. Remove camshafts. Remove valve lifters with magnet. Install Lifter Bore Sleeves (83 93 746) to protect lifter bores. Position Valve Retainer Remover (83 94 181) squarely on valve head and tap firmly with hammer. Remove keepers with magnet. Remove springs and caps.
  2. To assemble, install valve spring and cap over valve stem. Position retainers into groove in spring cap. Using Valve Retainer Remover (83 94 181) and Valve Retainer Installer Sleeve (83 94 207), carefully tap retainers into groove of valve stem. Length of valve spring when installed should be 1.46" (37 mm). To complete assembly, reverse disassembly procedure.
scientia non olet · About LEMON Manuals