LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1992 >> 900 Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Overhaul >> Cylinder Head >> Valve Guides

Valve Guides

  1. To check for valve guide wear, pull valve approximately .12" (3.0 mm) from its seat and check side play with a dial indicator. If side play exceeds .020" (.50 mm), replace valve and/or valve guide.
  2. To replace guide, flush hot water through head and pull valve guide from top of head using Guide Puller (83 93 811), Spacer (83 93 829), and Nut (83 93 845). To install, flush hot water through head and press in new valve guide from bottom side. Valve Seat - Grind intake and exhaust valve seats to an angle of 45 degrees.
scientia non olet · About LEMON Manuals