LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1991 >> 9000 CD, 2.3 M, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

Pack CV joint cups with grease. Tilt engine forward slightly while lowering into position. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table. Bleed clutch (if equipped).



Pack CV joint cups with grease. Insert bolt through left-hand engine mount. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table. Bleed clutch (if equipped).

scientia non olet · About LEMON Manuals