LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1991 >> 9000 CD, 2.3 M, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [L], 2.1L 4-CYL [E], 2.3L 4-CYL [B,M] >> Oil Pump >> Installation

Oil Pump: Installation

Coat gears with oil. Ensure ring gear is installed with mark on visible face. Position NEW sealing ring into groove in pump body. Prime pump with oil and install on engine. Remove oil filter adapter casting and fill passage with oil. Install casting.

NOTE: It may be necessary to pull pump gear out slightly to position gear on driving plate.
scientia non olet · About LEMON Manuals