Valves & Valve Springs Specifications
VALVES & VALVE SPRINGS SPECIFICATIONS
| Application |
Specification |
| 2.0L, 2.1L & 2.3L |
| Intake Valves |
| Face Angle |
44.5° |
| Head Diameter |
1.26" (32 mm) |
| Minimum Margin |
|
| Minimum Refinish Length |
|
| Stem Diameter |
.274-.275" (6.96-6.99 mm) |
| Valve Tip Maximum Refinish |
|
| Exhaust Valves |
| Face Angle |
44.5° |
| Head Diameter |
1.14" (29 mm) |
| Minimum Margin |
|
| Minimum Refinish Length |
|
| Stem Diameter |
.274-.275" (6.96-6.99 mm) |
| Valve Tip Maximum Refinish |
|
| Valve Springs |
| Free Length |
1.77" (45.00 mm) |
| Installed Height |
1.46" (37.0 mm) |
| Out-Of-Square |
|
| Pressure Lbs. @ In. (kg @ mm) |
132-145 lbs. @ 1.12" (60-66 kg @ 28.4 mm) |