LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1987 >> 9000 Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Ignition Switch >> Removal (900)

Removal (900)

  1. Disconnect negative battery cable and remove driver's seat. Lift shifter boot and fold carpeting back. Remove 3 gear lever console retaining screws. Lift cover and unplug ignition lock warning light. Remove cover.
  2. Remove center console. Unplug wiring connectors from ignition lock and reverse light switch. Remove gear lever housing retaining screws using Remover (87 90 370). Raise gear lever housing slightly. Twist housing slightly to access cover plate screws. Remove cover plate. Loosen 2 ignition switch retaining screws and remove switch.
scientia non olet · About LEMON Manuals