95 & 96 Sport & Monte CARLO (1963-72): Removal
- Remove steering wheel and horn button assembly. Remove clamp screw at column-to-steering gear pinion connection. Remove nut from upper end of gearshift shaft "U" joint and drive out taper pin using suitable drift (784083). If equipped, remove return spring above joint.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
- After driving out locking pins, remove screws for steering column stand. Remove column, complete with gearshift shaft and lever. Pull column out of its bearing and remove the two rubber bushings together with steering column bushings. Remove cardboard sleeve between bushings and if necessary, remove wiring.