LEMON Manuals: Even more car manuals for everyone
Home >> Renault >> 1986 >> Sportwagon Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

  1. Slide new deflector onto axle and drive in place using hub nut and Installer Sleeve (Rou. 737-01). Mount inner bearing onto axle using sleeve of Extractor (Rou. 370-02) and hub nut.
  2. Install outer bearing race. Install new grease seal using Seal Installer (Rou. 770). Pack inside of hub with grease and coat bearing rollers. Install hub, outer bearing, washer, and hub nut. Adjust bearings. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals