LEMON Manuals: Even more car manuals for everyone
Home >> Renault >> 1985 >> Sportwagon Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Bearing >> Removal

Wheel Bearing: Removal

  1. Raise vehicle and support with safety stands. Remove wheel assembly. Release parking brake. Loosen secondary cables of parking brake so that lever may be drawn back.
  2. Remove dust plug from backing plate and disengage automatic adjuster. Insert a screwdriver through backing plate and hole in brake shoe, push in against parking brake lever to disengage catch. Push the lever towards the rear.
  3. Remove hub dust cap, cotter pin, and lock nut. Remove hub nut and washer. Remove brake drum, outer bearing, and seal. Using bearing removal tool (Rou. 370-02), place centering sleeve on axle.
  4. Install 2 half casings in place and clamp assembly with retaining ring. Remove inner bearing from axle with assembly and extractor tool (Mot. 49). Remove grease seal deflector with extractor tool.
scientia non olet · About LEMON Manuals