Removing Wire Harness For Rear Door (BODYSHELL)

1. 1.1  Release and unplug electric plug connections -1-  .
2. 1.2  Loosen clip -2-  from cover on power windows mechanism -4-  .
3. 1.3  Press grommet -3-  through cover on power windows mechanism -4-  .
4. 1.4  Remove cover on power windows mechanism -4-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cover for power windows mechanism

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connections

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sleeve

1. 4.1  Unclip clips -2-  .
2. 4.2  Prise off sleeve -3-  .
3. 4.3  Release and unplug electric plug connections -1-  .
4. 4.4  Push wire harness for rear door (bodyshell) -4-  into the bodyshell and remove it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Wire harness for rear door (bodyshell)