Removing Front Emergency Call System Antenna
NOTE:
NOTIFICATION
Voltage peaks
Voltage peaks
- Risk of damage to electrical load or to the control unit
- Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
- Switch off electrical loads before disconnecting or removing them.
- Release and disconnect electric plug connection for front emergency call system antenna -1
.
Electric plug connection for front emergency call system antenna
- Loosen front emergency call system antenna -2-
.
Front emergency call system antenna
- 2.1 Release locking lugs -1- .
- 2.2 Guide front emergency call system antenna -2- out of holder -3- (-arrow- ).
- Remove front emergency call system antenna.