Installing Mobile Communication Antenna On Body Front Section

Information 

• Bonding surfaces must be free of silicone, grease and oil residues. 

1. Remove adhesive residues using cleaning agent.
2. Install new mobile communication antenna on body front section.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding area

   1. 2.1  Clean the marked area -1-  with isopropanol and rub it dry using a lint-free, moisture-absorbing cloth.
   2. 2.2  Pull off carrier film and press new mobile communication antenna for body front section on at the marked area -1-  .
   3. 2.3  Press on new mobile communication antenna for body front section from the inside out using a plastic squeegee to squeeze out bubbles.
3. Check new mobile communication antenna on body front section.
   1. 3.1  Check that there are no bubbles.
   2. 3.2  Check that the corners are affixed correctly.
   3. 3.3  Press them on again if necessary.
4. Further installation is performed in reverse order.

   Electric plug connections must engage securely.