Removing C-Pillar Reinforcement
- Drill through clinch points.
- 1.1 Drill through clinch points in area -A- . > Diameter 6.6 mm
- 1.2 Drill through clinch points in area -B- . > Diameter 4 mm
Clinch points
- Only for Panamera Saloon
Drill out spotwelds.
Spotwelds - Panamera Saloon
- Only for Panamera Sport Turismo
Drill out spotwelds.
Spotwelds - Panamera Sport Turismo
- Heat bonding areas using > V.A.G 1416 - Hot-Air Blower
.
Bonding areas
- Remove C-pillar reinforcement.
Information
The C-pillar reinforcement baffle will be damaged irreparably during removal and must be replaced.