Gap Dimensions Of Rear Lid
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Rear lid to roof/P-roof (R1) | Gap dimension | 4.5 mm | + 1 mm - 0.2 mm |
|
|
Gap dimension |
||||
| Rear lid to roof/P-roof (R7) | Gap dimension | 4.8 mm | + 1 mm - 0.2 mm |
|
|
Gap dimension |
||||
| Rear lid to roof/P-roof (R6) | Gap dimension | - 0.2 mm | + 0.8 mm - 0.7 mm |
|
|
Gap dimension |
||||
| Rear lid to roof/P-roof (R8) | Gap dimension | - 2 mm | +/- 0.8 mm | |
|
Gap dimension |
||||
| Rear lid to side panel (R2) | Gap dimension | 3.5 mm | +/- 0.5 mm | |
|
Gap dimension |
||||
| Spoiler to side panel (R3) | Gap dimension | 3.5 mm | +/- 0.7 mm | |
|
Gap dimension |
||||
| Rear lid to side panel (R9) | Gap dimension | 4 mm | +/- 0.7 mm | |
|
Gap dimension |
||||
| Rear lid to rear apron (R4) | Gap dimension | 3.7 mm | +/- 0.8 mm | |
|
Gap dimension |
||||
| Rear lid to rear apron (R5) | Gap dimension | - 1 mm | +/- 0.9 mm | |
|
Gap dimension |
||||