Installing Guide And Tensioning Rails - Left Cylinder Bank

1. 1.1  Push slide -1-  onto holder -2-  until the locking lug -3-  engages in the cut-out -4-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Slide

1. 2.1  Install guide rail -1-  .
   1. 2.1.1  Position guide rail -1-  .
   2. 2.1.2  Fit and tighten screws -3-  .
   • Tightening torque 9 Nm (6.5 ftlb.) 
2. 2.2  Install tensioning rail -2-  .
   1. 2.2.1  Position tensioning rail -2-  .
   2. 2.2.2  Fit and tighten bearing pins -4-  .
      • Tightening torque 23 Nm (17 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide and tensioning rails - left cylinder bank