Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Screw for balance shaft bracing wheel |
Replace following removal. |
Initial tightening |
40 Nm (30 ftlb.) |
|
|
| Screw for balance shaft bracing wheel |
Replace following removal. |
Torque angle |
+ 45° |
|
|