Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for crankshaft bearing covers | Replace following removal. | Initial tightening | 30 Nm (22 ftlb.) | ||
| Screws for crankshaft bearing covers | Replace following removal. | Torque angle | + 90° | ||
| Screws for crankshaft bearing covers, side | Replace following removal. | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screws for crankshaft bearing covers, side | Replace following removal. | Torque angle | + 90° | ||
| Screw on guide rail for oil pump | Tightening torque | 9 Nm (6.5 ftlb.) |