Removing Connecting Link For Anti-Roll Bar

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove connecting link for anti-roll bar -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connecting link for anti-roll bar
1. 1.1 Unscrew screw securing connecting link for anti-roll bar to lower trailing arm -2- .
2. 1.2 Unscrew screws securing connecting link for anti-roll bar to anti-roll bar -3- and counter at nut -4- .
3. 1.3 Remove connecting link for anti-roll bar -1- .