LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2024 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (27 Starter, Power Supply, Cruise Control 3.0L -- 95B - MACAN (95B)) >> WM, 270519 - Removing And Installing Battery Sensor >> Installing Battery Sensor

Installing Battery Sensor

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Switch off all loads and keep transmitter key outside of the transmission range (at least 2 metres/6 feet).

Information 

After replacing the battery sensor, the battery sensor will be detected automatically by the gateway control unit.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening nut -3-  to > Tightening - torque 18 Nm (13 ftlb.)  .

    G15151597Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Battery sensor