Preliminary Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Only for pressure sensor on centre intake-air distributor:

Remove engine cover (design cover).
- WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
Only for pressure sensor on left charge-air cooler:

Remove left front wheel.
- WM, 440519 REMOVING AND INSTALLING WHEEL
Remove front wheel housing liner at the left.
- WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER