Removing Front Drive Shaft

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Change into neutral gear.
R4 only:
Remove heat protection panel at the right -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Right heat protection panel
1. 2.1 Unscrew screws -2- .
2. 2.2 Remove the heat protection panel at the right -1- .
Remove drive shaft -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drive shaft
1. 3.1 Unscrew drive shaft screws -2- .
2. 3.2 Turn wheel bearing housing in until the drive shaft -1- can be pulled out of the wheel bearing housing.
3. 3.3 Remove drive shaft -1- .