Removing Upper Trailing Arm

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove upper trailing arm -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Upper trailing arm
1. 1.1 Unscrew nut -2- for the clamping screw on the wheel bearing housing -3- and pull clamping screw on wheel bearing housing -3- out of the wheel bearing housing.
2. 1.2 Loosen upper trailing arm -1- from the wheel bearing housing.
3. 1.3 Unscrew the relevant screw -4- and counter at the nut -5- .
4. 1.4 Remove the relevant upper trailing arm -1- .