LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (26 Exhaust System 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 267619 Removing And Installing Primary Catalytic Converter (V8 BITURBO) >> Information >> Removing Primary Catalytic Converter

Removing Primary Catalytic Converter

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Hot components 
  • Risk of burns 

    → Let hot components cool down.

    → Wear personal protective gear.

  1. Loosen V-band clamp -1-  .
    1. 1.1 Loosen screw -2-  and relieve tension on V-band clamp -1-  .
    2. 1.2 Carefully loosen V-band clamp -1-  from the turbocharger/catalytic converter flange using a hammer and wedge.
      G15879617Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      V-band clamp on turbocharger/catalytic converter flange

  2. Unscrew oxygen sensors downstream of catalytic converter -1 and 2-  .

    > 247319 REMOVING AND INSTALLING OXYGEN SENSOR DOWNSTREAM OF CATALYTIC CONVERTER (V8 BITURBO)

    G15879618Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Oxygen sensor downstream of catalytic converter

  3. Remove V-Land clamp -2-  .
    1. 3.1 Loosen screw -1-  and loosen and remove V-band clamp -2-  from the flange.
      G15879619Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      V-band clamp on catalytic converter

  4. Loosen primary catalytic converter -1-  at the holder -3-  and remove it.
    1. 4.1 Loosen and unscrew screws -2-  on the holder -3-  .
    2. 4.2 Remove primary catalytic converter -1-  .
      G15879620Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Removing primary catalytic converter