LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (26 Exhaust System 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 267319 Removing And Installing Catalytic Converter (V8) >> Removing Catalytic Converter

Removing Catalytic Converter

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew oxygen sensors downstream of catalytic converter -1 and 2-  .
    G15879608Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Oxygen sensor downstream of catalytic converter

  2. Remove V-band clamp -2-  .
    1. 2.1 Loosen screw -1-  and loosen and remove V-band clamp -2-  from the flange.
      G15879609Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      V-band clamp on catalytic converter

  3. Loosen and remove ball clamps -2-  .
    G15879610Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Ball clamps

  4. Remove catalytic converter.
    1. 4.1 Unscrew and remove screw -1-  .
    2. 4.2 Only for catalytic converter on cylinder bank 2:  Remove catalytic converter holder -3-  .
      1. 4.2.1 Unscrew screws -2-  and remove holder -3-  .
    3. 4.3 Carefully guide out catalytic converter -4-  at the relevant side.

      Make sure not to damage the heat shields. 

      G15879611Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Catalytic converters with holder