Removing Oxygen Sensor Downstream Of Catalytic Converter On Cylinder Bank 2
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Installation overview of oxygen sensor on cylinder bank 2
- Pull engine approx. 20-30 mm to the left using the special tool > 9866 - support
.
- Loosen cable plug for oxygen sensor from the vehicle underbody.
- 2.1 Release and disconnect plug connection -1-
.
- 2.2 Loosen connector housing from the bracket -2-
.
- 2.3 Expose cable -3-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Cable plug for oxygen sensor on cylinder bank 2
- Remove oxygen sensor downstream of catalytic converter on cylinder bank 2.
- 3.1 Unclip line from cable clamps -1-
and guide it up and out.
- 3.2 Loosen and unscrew oxygen sensor -2-
using > T10491 - socket a/f 22
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Cable routing of oxygen sensor on cylinder bank 2