Technical Values
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for clamp for high-pressure line | m6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing heat shield to high-pressure pump | M6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing heat shield to high-pressure pump | M6 x 25 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw for high-pressure pump | M6 x 22 | Tightening torque | 12 Nm (9 ftlb.) | ||
| Union nut for fuel high-pressure line | Coat thread on union nuts with Microgleit DF 977S. Leave to dry off for at least 5 minutes before fitting. Observe specified tightening sequence! | Initial tightening | 8 Nm (6 ftlb.) | ||
| Union nut for fuel high-pressure line | Final tightening | + 50° |