LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (24 Fuel System - Electronic Injection 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 246319 Removing And Installing High-Pressure Pump (V8 BITURBO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery.

    > 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY

  2. Remove cover for front underbody.

    > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY

  3. Remove cross panel.

    > WM, 508119 REMOVING AND INSTALLING CROSS PANEL

  4. Only for left high-pressure pump: 

    Remove fuel line (from left high-pressure pump to rail).

    > 249019 REMOVING AND INSTALLING FUEL LINE (LEFT HIGH-PRESSURE PUMP TO RAIL) 

  5. Only for right high-pressure pump: 

    Remove fuel line (from right high-pressure pump to rail).

    > 249019 REMOVING AND INSTALLING FUEL LINE (RIGHT HIGH-PRESSURE PUMP TO RAIL)