LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (24 Fuel System - Electronic Injection 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 244619 Removing And Installing Intake-Air Distributor (V8 BITURBO) >> Installing Intake-Air Distributor

Installing Intake-Air Distributor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order.
  2. Check seal and replace it if necessary.
  3. Screw in and tighten screws in the specified sequence -2 to 8-  > Tightening torque 9 Nm (6.5 ftlb.) 
    Fig 1: Intake-Air Distributor Screws Tightening Sequence
    G15879484Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screwing in and tightening screws