Technical Values
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for fuel collection pipe | M6 x 16/observe tightening sequence | Initial tightening | 7 Nm (5 ftlb.) | ||
| Screw for fuel collection pipe | Final tightening | 10 Nm (7.5 ftlb.) | |||
| Screw for clamp on high-pressure line | M6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Union nut for fuel high-pressure line | Coat thread on union nuts with Microgleit DF 977S. Leave to dry off for at least 5 minutes before fitting. Observe specified tightening sequence! | Initial tightening | 8 Nm (6 ftlb.) | ||
| Union nut for fuel high-pressure line | Final tightening | + 50° |