LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (24 Fuel System - Electronic Injection 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 240919 Removing And Installing Fuel Pressure Sensor (High-Pressure Sensor) (V8 BITURBO) >> Installing Fuel Pressure Sensor (High-Pressure Sensor)

Installing Fuel Pressure Sensor (High-Pressure Sensor)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Replace sealing ring on the fuel pressure sensor.

    Coat the thread of the union nut on the fuel pressure sensor with Microgleit DF 977S. Observe a drying time of at least 5 minutes before fitting.

    Tightening torque for fuel pressure sensor: > Tightening torque 20 Nm (15 ftlb.) 

scientia non olet · About LEMON Manuals