Removing Trim Panel For Rear Lid

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

To prevent damage, use a suitable tool as a support during removal at accessible connection points.

Unscrew expanding screws and pull out rubber stop -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rubber stop
Unclip bracket for cord -1- using a plastic wedge. -arrow-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bracket for cord

Loosen trim panel for rear lid at the bottom. Only on Sport Turismo

3.1 Open flap in rear lid trim panel at the bottom.

3.2 Unscrew and remove screws -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Trim panel for rear lid, bottom

Unclip trim panel for rear lid at the bottom -4- starting from the rear window. -arrow-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Trim panel for rear lid, bottom
Unclip trim panel for window frame at the centre -5- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Trim panel for window frame, centre
Unscrew screw -7- and unclip trim panel for window frame -6- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Trim panel for window frame