LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (13 Engine - Crank Drive, Pistons 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 138519 Removing And Installing Balance Shaft (V6 Turbo) >> Removing Balance Shaft (V6 Turbo)

Removing Balance Shaft (V6 Turbo)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Dirt and contamination 
  • Risk of damage to units or components 

    → Protect components from dirt and contamination.

    → Clean or replace dirty components.

  1. Remove balance shaft -3-  .
    1. 1.1 Loosen and unscrew screws -1-  and remove end plate -2-  for balance shaft -3-  .
    2. 1.2 Remove old seal and remove thrust washer -4-  from balance shaft -3-  .
    3. 1.3 Remove balance shaft -3-  for transmission side from the engine block.
    G15822872Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Balance shaft end plate