LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (13 Engine - Crank Drive, Pistons 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 138019 Removing And Installing Balance Shaft Bracing Wheel (V6 Turbo) >> Removing Balance Shaft Bracing Wheel >> Removing Balance Shaft Drive Wheel

Removing Balance Shaft Drive Wheel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove balance shaft bracing wheel -1-  .
    1. 1.1 Insert special tool > T40362 - Locking tool  as far as it will go into the cut-out on the balance shaft bracing wheel -1-  . Then turn it 180° clockwise to lock the backlash compensation.
    2. 1.2 Loosen and unscrew screw -2-  and counter the crankshaft at the previously fitted special tool > T40049 - Special wrench  .
    3. 1.3 Remove balance shaft bracing wheel -1-  .
    G15822867Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Balance shaft bracing wheel

  2. Turn special tool > T40362 - Locking tool  180° anti-clockwise and pull it out of the balance shaft bracing wheel.
scientia non olet · About LEMON Manuals