LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (20 Fuel Supply, Actuator 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 207019 Removing And Installing Control Unit For Fuel Pump >> Removing Control Unit For Fuel Pump

Removing Control Unit For Fuel Pump

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Voltage peaks 
  • Risk of damage to electrical load or to the control unit 

    → Remove the ignition key and switch off load before disconnecting or removing load.

  1. Release and disconnect electric plug connection -2-  on control unit for fuel pump -1-  .
    G15877909Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Releasing and pulling off electric plug connection

  2. Unclip line bracket -3-  .
    G15877910Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping line bracket

  3. Unscrew nut -4-  and remove holder with control unit for fuel pump -1-  .
    G15877911Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing control unit for fuel pump

  4. Unclip control unit for fuel pump -1-  from holder -5-  (-arrows-  ).
G15877912Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping control unit for fuel pump