LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (20 Fuel Supply, Actuator 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 201019 Removing And Installing Fuel Tank (Hybrid) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Read and observe general warning notes for working on the high-voltage vehicle electrical system.

    > 2X00IN GENERAL WARNING NOTES FOR WORKING ON THE HIGH-VOLTAGE VEHICLE ELECTRICAL SYSTEM

  2. Isolate the high-voltage system from the power supply.

    > 2X00IN ISOLATING HIGH-VOLTAGE SYSTEM FROM POWER SUPPLY/STARTING HIGH-VOLTAGE SYSTEM

  3. Disconnect 48 V system.

    > 270703 DISCONNECTING AND STARTING 48 V SYSTEM

  4. Place a warning sign in a clearly visible position in the work area or on the vehicle > Example of a warning sign  .
    G15877809Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Example of a warning sign

  5. Remove rear right seat.

    > WM, 724819 REMOVING AND INSTALLING REAR SEAT - Coupe or WM, 724819 REMOVING AND INSTALLING REAR SEAT - Wagon

  6. Empty the fuel tank.

    > WM, 2010EN EMPTYING AND FILLING THE FUEL TANK 

  7. Release air from air suspension.

    > 430117 BLEEDING AND FILLING THE LEVELLING SYSTEM

  8. Disconnect the battery.

    > WM, 270619 REMOVING AND REINSTALLING BATTERY

  9. Remove cover for centre underbody.

    > WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY

  10. Remove exhaust system.

    > 260119 REMOVING AND INSTALLING EXHAUST SYSTEM

  11. Remove rear cardan shaft.

    > 393519 REMOVING AND INSTALLING REAR CARDAN SHAFT

  12. Remove heat shields on centre tunnel.

    > WM, 261420 REMOVING AND INSTALLING HEAT SHIELDS

  13. Remove rear axle housing.

    > 420519 REMOVING AND INSTALLING REAR AXLE HOUSING