Removing Pressure Pipe

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

Disconnect hoses -1- and -2- on the pressure pipe -3- .
1. 1.1 Loosen screw-type clamp -4- and pull off connecting hose -1- .
2. 1.2 Loosen screw-type clamp -5- and pull off pressure hose -2- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure hose from turbocharger to charge-air cooler
Remove pressure pipe -1- at the turbocharger.
1. 2.1 Release and disconnect electric connector for temperature sensor -2- .
2. 2.2 Unscrew screws -3- .
3. 2.3 Remove pressure pipe -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure pipe on turbocharger