Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw securing potential equalization line to electric motor | Tightening torque | 20 Nm (15 ftlb.) | |||
|
Potential equalization on electric motor |
|||||
| Fastening screws for heat protection on rotor position sensor | Tightening torque | 8 Nm (6 ftlb.) | |||
|
Rotor position sensor and temperature sensor for electric motor |
|||||
| Fastening screws securing coolant line to electric motor | Tightening torque | 8 Nm (6 ftlb.) | |||
|
Coolant lines on electric motor |
|||||
| Screw securing Porsche Doppelkupplung (PDK) to engine | M12 x 100 x 30/replace | Initial tightening | 20 Nm (15 ftlb.) | ||
| Screw securing Porsche Doppelkupplung (PDK) to engine | M12 x 100 x 30/replace | Torque angle | 60 (44 ftlb.) ° | ||
| Screw securing Porsche Doppelkupplung (PDK) to engine | M10 x 95/replace | Initial tightening | 15 Nm (11 ftlb.) | ||
| Screw securing Porsche Doppelkupplung (PDK) to engine | M10 x 95/replace | Torque angle | 105° | ||
| Screw for connection point for ATF lines/transmission | M8 x 20 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screw for ATF lines/transmission | M6 x 12 | Tightening torque | 8 Nm (6 ftlb.) | ||