Technical Values For Rear Cardan Shaft

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Centre Bearing Holder Component Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrewing screws on centre bearing holder

3	Screws on centre bearing for rear cardan shaft > Tightening torque 20 Nm (15 ftlb.)